PA Rigging / L-Acoustics / L2 / Attaching K2-JACK Stabilizers

L2 — Attaching K2-JACK Stacking

Fitting K2-JACK stabilizers to L2-CHARIOT/L2D-CHARIOT so a ground-stacked L2/L2D array can be lifted clear of its wheels. Reference: LA-L2-K2JACK-01. Follow in order — this is a sequential rigging procedure, not an independent checklist; steps depend on the ones before them.

0/ complete

Not saved anywhere — resets when you leave this page.

Safety notes

Minimum 2 operators. Rigging accessories: K2-JACK, L2-CHARIOT/L2D-CHARIOT.
Dust coming off the threaded rod on first use is expected and does not indicate a malfunction.
Stop raising the enclosure as soon as its wheels get off the ground.

Prerequisite

Each L2/L2D is already secured to its own chariot. See Securing on L2-CHARIOT/L2D-CHARIOT.

Mounting the Stabilizers

Attach K2-JACK to the L2-CHARIOT/L2D-CHARIOT: insert the K2-JACK studs through the chariot, then raise and turn the K2-JACK handle to secure the locking system. Prepare the K2-JACK stabilizers by rotating the threaded rod counter-clockwise so the central part of each stabilizer sits closest to the base. Attach the stabilizers to the bar: insert the feet in the guides at both ends of the bars, pivot the feet so they contact the bars, then lock each into position with a quarter turn of the locking system. Rotate the feet clockwise to raise the chariot off the ground — stop as soon as the wheels get off the ground.

Source: L-Acoustics L2 Owner's Manual, EN, v5.0. Rigging procedures, pp.129-131.