PA Rigging / L-Acoustics / K3 / Stacking K3 on K3-BUMP

K3 — Stacking K3 on K3-BUMP

Ground-stacking K3 enclosures directly on K3-BUMP. Reference: LA-K3-STACK-BUMP-01. Follow in order — this is a sequential rigging procedure, not an independent checklist; steps depend on the ones before them.

Minimum 2 operators.
Stacked K3 on K3-BUMP: safe limit 4 / maximum 6.

0/ complete

Not saved anywhere — resets when you leave this page.

Stacking on K3-BUMP

Place K3-BUMP on the ground. Position a first K3 on K3-BUMP: prepare the front and rear rigging arms and secure them with the ball-locking pins, turn K3 upside down and position it on K3-BUMP, then secure the front and rear rigging arms to the K3-BUMP. Repeat the previous step to position another K3 on the first one.

Source: L-Acoustics K3 Owner's Manual, EN, v4.1. Rigging procedures, pp.102-104.