PA Rigging / L-Acoustics / K3 / Stacking Multiple K3-CHARIOTLID for Transport

K3 — Stacking Multiple K3-CHARIOTLID for Transport

Stacking K3-CHARIOTLID units on K3-CHARIOT for transport. Reference: LA-K3-CHARIOTLID-STACK-01. Follow in order — this is a sequential rigging procedure, not an independent checklist; steps depend on the ones before them.

Minimum 1 operator.
Prerequisite: the rear rigging arms of K3-CHARIOT must be in storage position before starting.
Alternate the orientation of each successive K3-CHARIOTLID when stacking multiple.

0/ complete

Not saved anywhere — resets when you leave this page.

Stacking the Lids

Position one K3-CHARIOTLID on K3-CHARIOT, with its longer side on the rear rigging arms of K3-CHARIOT. Secure K3-CHARIOTLID to the front rigging arms of K3-CHARIOT using the locking pin. Position another K3-CHARIOTLID, flipped, on the first one — its longer side must be on the front side of K3-CHARIOT (alternate the orientation of each successive lid when stacking multiple). Repeat the previous three steps until each K3-CHARIOTLID is stacked.

Source: L-Acoustics K3 Owner's Manual, EN, v4.1. Rigging procedures, pp.105-106.